GP Buckets for Excavator Attachments

General Purpose (GP) Buckets are excavator buckets that are primarily used for digging earth materials such as sand and clay.

At Excavator Buckets Direct our GP buckets are engineered to give you easy digging.

Our GP Buckets in Melbourne has Double Radius, Pressed Beam Top Box Structure, Quench and Tempered Grade 400 Wear Plate, One Piece Side-Edge, Cutting Edge, Adapters, and Teeth & Side Cutters (optional).

General Purpose Buckets in Melbourne

The construction industry has become more dependent on the technology of their equipment for efficiency and speed. One of the most commonly used is the GP buckets.

Generally speaking GP buckets for sale are considered to be ideal for construction activities in normal digging conditions. Normal would actually refer to soft soil. This is also commonly used for excavation jobs. For such purposes, it should possess the specifications that are going to be indicated here.

To know the right bucket to look for, you have to know the exact application that shall be carried out by the bucket. A lot of factors can come into play such as the kind of ground, the architecture of the site, size of the excavation, etc…

Having said those, durability has got to be your foremost concern, especially for this high duty equipment. Always look for similar equipment feedback to be able to make an informed decision. This kind of bucket is used for a lot of digging conditions such as light shale and rock. It should also be compatible with pin grabbers.

Capacity is an important feature, as well as the design. Every size of machine should have standard and high capacity. As far as the design is concerned, revised geometry is preferred and should be tapered for less drag, consequently providing an improved performance. Environment should also be greatly considered because operations can happen in every imaginable location.

The penetration required is another thing to consider. Low to medium abrasion would include dirt, compacted soil, loose overburden material, and shot or broken limestone. Extreme digging with high abrasion and high impact require another kind so this should be determined immediately.

Why GP Buckets are better?

Ripping is another function of the buck with specifications that you should also be aware of. It must have advanced shank geometry to break through and rake the hardest surfaces in a snap. A ripper with a streamlined design would effectively rip the material and not plow it. Tyne cheeks should be reinforced to add to its durability. High strength steel should be the material used to increase its expected lifespan. Always go for a ripper with a heavy-duty base plate to be sure that it is stronger and will last longer. To add to your ripper concerns, a concerned supplier would usually have excavators for sale of various lengths and you should ask for the right length for your application. Don’t forget to ask for the boot and nose that usually come with the rippers.

Finishing and grading for the bucket can be complicated to handle. A nice approach that one could take is the 45 degree method. Keep in mind that you should get more material in front of the bucket for this to work because it prevents the machine from reacting too fast.

To summarize, a good knowledge of the material’s density should dictate the type of bucket that you need. Abrasiveness can also dictate the efficiency of the equipment as well as cohesion. Lifting capacity would definitely make your application faster or slower so factor this in as well, to get the right bucket for you.

For more information regarding GP Buckets and how we can help you, give us a call on (03) 9580 8009.